Candela Technologies Logo
Network Testing and Emulation Solutions

CT966 LANforge-ICE 10 Gbps WAN Emulator - 64-bit


The CT966 is an excellent choice for a 1U rack-mount network emulator supporting speeds up to 9.8 Gbps (bi-directional) traffic load on up to four 10 G ports (1500 byte packets). Regardless of packet size, the maximum rate is about 1.6 million packets per second in each direction according to measured performance metrics. The CT966 comes standard with 16GB RAM and a 3.5Ghz E5 v2 processor to support multiple seconds of latency at high speeds. The CT966 fits into a standard rack and is 14 inches deep. It supports standard VGA, Keyboard, and Mouse interfaces for easy console/desktop access to the system. The CT966 is relatively noisy, so it is better for a data center deployment than a desktop environment. No additional hardware or software is required, but you may wish to manage the system using the LANforge-GUI on a separate machine.


Larger Images: front back
NOTE: This product may have a different hardware configuration than the system pictured above.
Refer to your official quote for details.


NOTE: This product may have a different hardware configuration than the system pictured above.
Refer to your official quote for details.


Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618


Example Network Diagram


Quick Start Guide

  1. Connect Management ethernet port to Management network or management PC. If connecting directly to a PC, an ethernet cross-over cable should be used. Or, connect VGA, Keyboard, and Mouse to the chassis and manage it locally.
  2. Connect Client to one WAN emulation port and Server to the other. The two interfaces will be bridged and this bridge will inject the network emulation.
  3. Connect power plug to a standard US or European AC power source.
  4. If managing remotely, install the LANforge-GUI on a separate management PC or Laptop. Windows and Linux GUIs are supported: Select the correct one from the CDROM or Candela Technologies Download page and install it.
  5. The CT966 should now boot. If DHCP is enabled on the Management network, the CT966 will automatically acquire an IP address. If DHCP is not available, the IP address will be set to 192.168.1.101 by the LANforge scripts.
  6. Start the LANforge-GUI on the management PC, or the CT966 server if managing locally, and click the 'Discover' button. It should find the CT966 appliance and add the IP address to the drop-down box in the Connect widget. Press 'Connect' and you will be connected to the CT966.
  7. Select the WanLinks tab in the GUI. One of the pre-configured tests should already be running. You may double-click the row in the top section to modify the configuration. You can also view a real-time report of the test with the 'Display' button. Any modifications take place immediately after you click 'Submit'.


Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618


LANforge-ICE Related Screen Shots

WanLinks Tab


Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618

WanLink Display


Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618

Create/Modify WanLink Window


Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618

Software Features


  1. General purpose WAN and Network impairment emulator.
  2. Able to simulate DS1, DS3, OC-3, OC-12, OC-24, OC-48, DSL, CableModem, Satellite links and other rate-limited networks, from 10bps up to 9.8 Gbps (full duplex).
  3. Can modify various network attributes including: network-speed, latency, jitter, packet-loss, packet-reordering, and packet-duplication.
  4. Supports Packet corruptions, including bit-flips, bit-transposes and byte-overwrites.
  5. Supports WanPath feature to allow configuration of specific behavior between different IP subnets, MAC addresses or other packet filters using a single pair of physical interfaces. WanPath support may require purchase of additional WanPath licenses, please ask your sales contact for more information.
  6. Supports routed and bridged mode for more flexibility in how you configure your network and LANforge-ICE.
  7. Supports WAN emulation across virtual 802.1Q VLAN interfaces more efficient use of limited physical network interfaces.
  8. Supports 'WAN-Playback' allowing one to capture the characteristics of a live WAN and later have LANforge-ICE emulate those captured characteristics. The playback file is in XML format, and can be easily created by hand or with scripts. The free LANforge-ICEcap tool can be used to probe networks and automatically create the XML playback file.
  9. Allows packet sniffing and network protocol decoding with the integrated Wireshark protocol sniffer.
  10. Includes comprehensive management information detailing all aspects of the LANforge system including processor statistics, test cases, and Ethernet port statistics.
  11. GUI runs as Java application on Linux, MAC and Microsoft Operating Systems (among others).
  12. GUI can run remotely, even over low-bandwidth links to accommodate the needs of the users.
  13. Central management application can manage multiple units, tests, and testers simultaneously.
  14. Includes easy built-in scripting to automatically iterate through bandwidth, latency and other settings. Advanced programmatic scripting over a TCP socket also supported and example perl libraries and scripts are included.
  15. Automatic discovery of LANforge resources simplifies maintenance and configuration of LANforge test equipment.

Hardware Specification


  1. High-End Intel Multi-Core, PCIe-gen3 1U rackmount server.
  2. Operating System: Fedora 64-bit Linux with customized Linux kernel.
  3. 2 built-in 10/100/1000 Ethernet interfaces, one of which should be used for management.
  4. 1 built-in IPMI port.
  5. High-availability Ethernet hardware bypass option available.
  6. One Quad-Core Intel E5 v2 processor, 3.5+Ghz
  7. 1 PCIe-gen3 x16 slot (2-6 port 10/100/1000, 1-4 port 10G fibre, etc)
  8. 16 GB or more RAM.
  9. 40 GB or larger Hard Drive.
  10. Solid State Drive option available.
  11. Standard US or European power supply (automatically detects EU v/s US power).
  12. Weight: 18 lbs or 8.2 kg.
  13. Dimensions: 17 x 14 x 1.75 inches (14-inch deep 1U rackmount server)   Metric: 432 x 356 x 44 mm.
  14. Power Supply: Fixed 350W AC
  15. Estimated Power Usage: 1.4 Amps @ 120 VAC under load, 0.7 Amps idle.
  16. ROHS compliant.

List Price: $12,995     List Price with 1 Year support (17%): $15,204


Additional Feature Upgrades

Unless otherwise noted in the product description, these features usually cost extra:


Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618


Candela  Technologies, 2417 Main Street, Suite 201, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1.360.380.1618
Facebook | LinkedIn | Blog

Last modified: Mon Nov 11 13:01:02 PST 2024