sales@candelatech.com support@candelatech.com +1 (360) 380-1618 [PST, GMT -8]
	Network Testing and Emulation Solutions

Candela Technologies RF Chambers

Candela technologies offers a variety of affordable RF chambers to help our customers run various test scenarios in highly isolated and repeatable test conditions. Our RF chambers can be used for a variety of equipment testing: from basic AP and Station performance testing, to setting up complex mesh, roaming, antenna orientation testing and large-scale performance test scenarios. CT800 series chambers have excellent isolation and absorption and they come in a variety of sizes and have a variety of shielded interfaces needed for many different kinds of devices under test.

Highlights

• Specifically designed for RF technologies in the 2–6 GHz frequency range.
• Overall >70dB isolation on smaller chambers and >80dB on larger chambers (for most WiFi test cases the tester and Device Under Test are placed in different chambers providing near complete isolation)
• Even our smallest chambers can easily fit most common WiFi Access Points and Devices.
• Several different kinds of filtered ports/connectors to address a diverse set of customer use cases and Devices Under Test (SMA, 10G Ethernet, USB, USB-C, HDMI, Coax, Fiber)
• Ventilation/Cooling and Antenna Mounts.
• Universal A/C power strip inside the chambers.
• Higher end chambers have Programmable Turntables with full command integration into LANforge products.
• Front load for easy access and stack ability.

	Small	Medium	Large 2D	Large 2D 90+db
Model	CT810a	CT820a	CT840a	CT840b
Outside Dimension	451 x 536 x 437 mm 17.7 x 21.1 x 17.2 in [1]	550 x 650 x 535 mm 21.6 x 25.5 x 21 in [1]	1092 x 900 x 940 mm 43 x 35.5 x 37 in [1]	42 x 37 x 42 in [1]
Inside Dimension	408 x 396 x 408 mm 16 x 15 x 16 in [1]	480 x 490 x 480 mm 16 x 19 x 16 in [1]	890 x 660 x 520 mm 35 x 26 x 20 in [1]	35 x 29 x 23 in [1]
Pounds	57 lbs	66 lbs	200 lbs	180 lbs
Kilograms	26 kgs	30 kgs	91 kgs	80 kgs
Frequencies	800 MHz – 8 GHz
RF Isolation	≥70 dB	≥75 dB	≥85 dB
RF Absorption	≥4.5 dB for 2.4 GHz ≥10 dB for 5 GHz		≥18 dB for 1.3–18 GHz
Fan	Yes		Yes: API	Yes	Yes
Door Switch API	No		Yes	No	No
Light Switch API	No		Yes	No	No

1. Dimensions are width, depth, and height.

Interfaces/Connectors

	Small	Medium	Large 2D	Large 2D 90+db
SMA	16	16	16	32
10G Ethernet	3	3	3	3
USB-A (3.0)	1	1	2	1
USB-A (2.0)	Optional	Optional	Optional	4
USB-C	1	1	1	Optional
4K HDMI	0	1	1	Optional
RF Coax (Type F)	0	1	1	Optional
Fiber (Type FC)	0	1	1	Optional
Universal A/C Power Strip	Yes
DC Jack	Yes
Turn Table	No	No	2D	2D
LED Lights	No	No	Yes	Yes
Antenna Mounts	No	No	Yes	Yes
Web Camera	No	No	Yes	Yes
High Gain Directional Antennas	No	No	Yes	Yes

Turntable Specifications

	CT840a 2D	CT840b 2D
Turntable Diameter	11.8 in 300 mm
Load Capacity	10 Kg	5 Kg
Turntable Material	Polyurethane hard board
Turning Speed	RPM: 0-6
Positioning Accuracy	1°
Turning Range	360°
Maximum Current Consumption	2.5 A	2 A
Power	110-230 VAC, 50/60 Hz, single phase
Controller Connection	RJ 45 Ethernet	DB9 Serial
Turntable Height	37 mm	40 mm
Temperature Range	10 °C to 35 °C

Ordering Information

Size	Model	List Price	Lead Times
Small	CT810a	$3,995 USD [1,2]	1–4 weeks
Medium	CT820a	$4,995 USD [1,2]	1–4 weeks
Large 2D	CT840a	$21,000[1,2,3]	4–6 weeks
Large 2D 90+	CT840b	$35,000[1,2,3]	4–6 weeks
Large 3D	CT850b	$35K–$45K [1,2,3]	4–6 weeks

1. Customers can purchase annual H/W Warranty (not included in list price) that covers repair and replacement
2. Discounts available when chamber purchased as a part of an entire LANforge test setup.
3. Prices and lead time can change based on interface options

For more information, please contact sales@candelatech.com or give us a call at: 1-360-380-1618