Candela Technologies Logo
Network Testing and Emulation Solutions

CT523c-16w7i-10g-cu LANforge WiFIRE 802.11a/b/g/n/ac/BE 16 radio WiFi-7 Traffic Generator


The CT523c-16w7i-10g-cu wireless traffic generator is an excellent choice for testing Access Points and other WiFi networks. The 2x2 /BE (a/b/g/n/ac/AX/BE) Wifi-7 chipset NICs can support a single station or monitor port per radio. Each of the Virtual Stations has its own IP address, IP port space, MAC address and routing table. The Virtual Stations can be assigned to communicate to a particular Access Point, use a particular SSID, and Open or WPA/WPA2 authentication assigned. More advanced 802.1X authentication is also included. Each radio can be configured independently of the other. Transmit power and channel/frequency is configured on a per-radio basis. Most other settings are configurable per virtual station.

There are 16 Intel WiFi-7 /a/b/g/n/AC/BE 2.4/5Ghz/6Ghz WiFi radios per CT523c-16w7i-10g-cu and multiple LANforge systems can be clustered together for even more realistic radio interference patterns and increased traffic generation capability.

All virtual stations on the same radio must be on the same frequency, but as long as the protocol supports that frequency, the multiple protocols can be used concurrently. For instance, if the radio is configured for a 2.4Ghz channel, the stations can be /b, /g, /n, or /ax. If the radio is on a 5Ghz channel, the stations can be /a, /n, ac, or ax. The bandwidth can be configured for all protocols.

The Virtual Stations may be configured with all of the virtual interfaces on the same subnet, or different subnets, depending on the testing requirements. When used with something like VoIP, it allows all of the VoIP calls to use the standard IP ports (with one call per virtual interface).

The CT523c-16w7i-10g-cu has 8 antenna and is small and quiet enough to sit on a desk or work bench. The CT523c-16w7i-10g-cu has one free slot to support additional NICs. Existing STA licenses may be used or additional STA licenses may be purchased (please contact sales for licensing options). No additional hardware or software is required, but it is suggested that you manage the system using the LANforge GUI on a separate machine. The CT523c-16w7i-10g-cu can also be managed over a serial console in text mode or through a directly connected monitor, mouse and keyboard.

Performance exceeds 1800Mbps


Larger Images: With Antennas No Antennas
NOTE: This product may have a different hardware configuration than the system pictured above.
Refer to your official quote for details.

Larger Images: With Antennas No Antennas
NOTE: This product may have a different hardware configuration than the system pictured above.
Refer to your official quote for details.


Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618


Example Network Diagram



Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618

Quick Start Guide

  1. Connect Management Ethernet port to Management network or management PC. If connecting directly to a PC, an Ethernet cross-over cable should be used.
  2. Connect eth1 wired Ethernet interface to wired Ethernet interface on the AP or network under test. This usually is considered the 'server' side of the network.
  3. The Client side of the network will be the Virtual Stations configured on the CT523c-16w7i-10g-cu WiFi NIC(s).
  4. Connect power to standard US or European AC power source. If using external battery pack, then connect to that instead. Click button to power on the unit.
  5. The CT523c-16w7i-10g-cu should now boot. If DHCP is enabled on the Management network, the CT523c-16w7i-10g-cu will automatically acquire an IP address. If DHCP is not available, the IP address will be set to 192.168.1.101.
  6. Install the LANforge-GUI on a separate management PC or Laptop, or use VNC or remote-desktop programs to access the LANforge system directly. Windows, MAC-OS and Linux GUIs are supported: Select the correct one from the web page served from the LANforge system and install it.
  7. Start the LANforge-GUI on the management PC and click the 'Discover' button. It should find the CT523c-16w7i-10g-cu appliance and add the IP address to the drop-down box in the Connect widget. Press 'Connect' and you will be connected to the CT523c-16w7i-10g-cu.
  8. Select the Port Mgr tab in the GUI. Double-click on the device called 'wiphy0'. This is the Radio device, and should be configured for the correct, channel, country-code, etc. Next, select one or more of the Virtual Station interfaces and click 'Modify'. Enter the correct IP address information, SSID and WPA/WPA2 password (if Enabled). After applying these changes, the Virtual Station interface should associate with the AP and be ready to send traffic. You may create up to 16 Virtual Station interfaces per CT523c-16w7i-10g-cu with the 'Create' button.
  9. Once the interfaces are configured correctly, you can click on the Layer 3, VOIP/RTP and other LANforge-FIRE related GUI tabs and configure/modify/start/stop particular traffic patterns that utilize the virtual stations and wired Ethernet interface. In most cases, you will want one of the FIRE endpoints to be on the wired interface and the other to be on the WiFi Virtual Station interface. It is also valid to generate traffic between two Virtual Station interfaces. The GUI Chamber View window provides some automated test suites. Contact support if you have suggestions for improvements.
  10. Any GUI modifications take place immediately after you click 'Submit' or 'OK'.


Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618


LANforge WiFIRE Related Images

Virtual Station Configuration Screen


Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618

Layer 3 (Ethernet, UDP, TCP) Connections

Layer 3 Create/Modify Screen

Software Features


  1. Supports real-world protocols:
    1. Layer 2: Raw-Ethernet.
    2. 802.1Q VLANs.
    3. PPPoE: Integrated PPPoE support.
    4. Layer 3: IPv4, IPv6, UDP/IP, IGMP Multicast UDP, TCP/IP.
    5. Layer 4-7: FTP, HTTP, HTTPS, TFTP, SFTP, SCP
    6. 802.11a/b/g/n/AC/BE WiFi-7 Wireless Station (up to 16 per machine).
    7. Layer 4-7: TELNET, PING, DNS, SMTP, NMAP (via add-on script).
    8. File-IO: NFSv3, NFSv4, CIFS, iSCSI.
  2. Supports up to 1000 concurrent TCP connections with base license package.
  3. The CT523c-16w7i-10g-cu is able to push around 1.2Gbps using the 802.11AC wave-2 radio, depending on the protocols mix, wireless mode and environment, and speed of the network under test. Supports at least 60 VoIP (SIP, RTP) calls if appropriate licenses are purchased.
    Performance results (this system performs similar to the CT523): Open, wave2 4x4   |   TCP-DL-30sta-open wave-1 3x3 |   TCP-DL-30sta-wpa2 wave-1 3x3
  4. Supports real-world compliance with ARP protocol.
  5. Supports ToS (QoS) settings for TCP/IP and UDP/IP connections.
  6. Uses publicly available Linux and Windows network stacks for increased standards compliance.
  7. Utilizes libcurl for FTP, HTTP and HTTPS (SSL), TFTP and SCP protocols.
  8. Supports file system test endpoints (NFS, CIFS, and iSCSI file systems, too!). File system mounts can use the virtual interface feature for advanced testing of file server applications.
  9. Supports custom command-line programs, such as telnet, SMTP, and ping.
  10. Comprehensive traffic reports include: Packet Transmit Rate, Packet Receive Rate, Packet Drop %, Transmit Bytes, Receive Bytes, Latency, Jitter, various Ethernet driver level counters, and much more.
  11. Supports generation of reports that are ready to be imported into your favorite spread-sheet.
  12. Allows packet sniffing and network protocol decoding with the integrated Wireshark protocol sniffer.
  13. GUI runs as Java application on Linux, MAC and Microsoft Operating Systems (among others).
  14. GUI can run remotely, even over low-bandwidth links to accommodate the needs of the users.
  15. Central management application can manage multiple units, tests, and testers simultaneously.
  16. Includes easy built-in scripting for iterating through rates and packet sizes, with automated reporting. Also supports scriptable command line interface (telnet) which can be used to automate test scenarios. Perl libraries and example scripts are provided!
  17. Automatic discovery of LANforge data generators simplifies configuration of LANforge test equipment.
  18. LANforge traffic generation/management software is supported on Linux and MS Windows.


Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618


Hardware Specification


  1. High-End Appliance with quiet fan and 4 slots.
  2. Operating System: Fedora Linux with customized 64-bit Linux kernel.
  3. Two 1Gbps Ethernet ports, room for four additional NICs
  4. Intel be200 802.11a/b/g/n/AC/BE 2x2 tri-band WiFi-7 radio. Radio vendor information. Supports a single station per radio.
  5. be200: MLO eMLSR: Supported, listens to max of 2 links.
  6. be200: MLO MLMR: Not supported.
  7. be200: 320Mhz, 4096 QAM, 2.4, 5, 6Ghz supported.
  8. Antenna-to-Radio association: See labels on chassis.
  9. Intel 2-port 10G-BaseT (rj45) network adapter card, PCI-e x8, 5GT/s bus. Supports 100Mbps, 1Gbps, 2.5Gbps, 5Gbps and 10Gbps base-t
  10. Intel(R) Core(TM) i7-7700T 2.9Ghz CPU
  11. DB9 Serial console (115200 8 N 1) for console management & initial configuration.
  12. HDMI, VGA, USB ports for desktop usage.
  13. 8 GB RAM.
  14. 60+ GB Solid State Hard Drive.
  15. Larger storage drives available.
  16. External power supply (brick) supplying 5AMP at 24VCD, 120W. Input: 100-240V, 1.8AMP 50-60Hz
  17. Weight: 12 lbs
  18. Dimensions: 7.5 x 9.5 x 8 inches   Metric: 190 x 240 x 200 mm.
  19. Operating Temperature: -10 ~ 60°C.
  20. Certification: CE, FCC, RoHS

List Price: $66,400     List Price with 1 Year support (17%): $77,688


Additional Feature Upgrades

Unless otherwise noted in the product description, these features usually cost extra:


Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618


Candela  Technologies, 2417 Main Street, Suite 201, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1.360.380.1618
Facebook | LinkedIn | Blog

Last modified: Mon Nov 11 13:01:02 PST 2024