Candela Technologies Logo
 
http://www.candelatech.com
sales@candelatech.com
+1 360 380 1618 [PST, GMT -8]
Network Testing and Emulation Solutions

CT934 LANforge-ICE 1 Gbps Desktop WAN Emulator 8GB RAM

The CT934 is an excellent choice for a desktop or portable network emulator supporting speeds up to 980 Mbps (bi-directional) or 1 Gbps when traffic load is not maxed out in both directions. It comes standard with 8GB RAM to support multiple seconds of latency. The CT934 has no moving parts, so it is good for mobile work and desktop environments where a loud rackmount system is not desirable. It supports standard VGA, Keyboard, and Mouse interfaces for easy console/desktop access to the system. The CT934 hardware can support up to 3 simultaneous WAN emulations at near 1Gbps bi-directional throughput. Contact your sales representative if you prefer more than a single WAN emulation or LANforge-FIRE traffic generation feature sets. No additional hardware or software is required, but you may wish to manage the system using the LANforge-GUI on a separate machine.


Larger Images: front back
NOTE: This product may have a different hardware configuration than the system pictured above.
Refer to your official quote for details.


Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618


NOTE: This product may have a different hardware configuration than the system pictured above.
Refer to your official quote for details.


Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618

Example Network Diagram

Quick Start Guide

  1. Connect Management Ethernet port to Management network or management PC. Or, connect VGA, Keyboard, and Mouse to the chassis and manage it locally.
  2. Connect Client to one WAN emulation port and Server to the other. The two interfaces will be bridged and this bridge will inject the network emulation.
  3. Connect power plug to a standard US or European AC power source.
  4. If managing remotely, install the LANforge-GUI on a separate management PC or Laptop. Windows and Linux GUIs are supported: Select the correct one from the CDROM or Candela Technologies Download page and install it.
  5. The CT934 should now boot. If DHCP is enabled on the Management network, the CT934 will automatically acquire an IP address. If DHCP is not available, the IP address will be set to 192.168.1.101 by the LANforge scripts.
  6. Start the LANforge-GUI on the management PC, or the CT934 machine if managing locally, and click the 'Discover' button. It should find the CT934 appliance and add the IP address to the drop-down box in the Connect widget. Press 'Connect' and you will be connected to the CT934.
  7. Select the WanLinks tab in the GUI. One of the pre-configured tests should already be running. You may double-click the row in the top section to modify the configuration. You can also view a real-time report of the test with the 'Display' button. Any modifications take place immediately after you click 'Submit'.


Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618


LANforge-ICE Related Screen Shots

WanLinks Tab


Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618

WanLink Display


Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618

Create/Modify WanLink Window


Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618

Software Features

  1. General purpose WAN and Network impairment emulator.
  2. Able to simulate DS1, DS3, OC3, OC12, DSL, CableModem, Satellite links and other rate-limited networks, from 10bps up to 1 Gbps (full duplex), with at least 8 seconds of one-way latency.
  3. Can modify various network attributes including: network-speed, latency, jitter, packet-loss, packet-reordering, and packet-duplication.
  4. Supports Packet corruptions, including bit-flips, bit-transposes and byte-overwrites.
  5. Supports WanPath feature to allow configuration of specific behavior between different IP subnets, MAC addresses or other packet filters using a single pair of physical interfaces. WanPath support may require purchase of additional WanPath licenses, please ask your sales contact for more information.
  6. Supports routed and bridged mode for more flexibility in how you configure your network and LANforge-ICE.
  7. Supports WAN emulation across virtual 802.1Q VLAN interfaces more efficient use of limited physical network interfaces.
  8. Supports 'WAN-Playback' allowing one to capture the characteristics of a live WAN and later have LANforge-ICE emulate those captured characteristics. The playback file is in XML format, and can be easily created by hand or with scripts. The free LANforge-ICEcap tool can be used to probe networks and automatically create the XML playback file.
  9. Allows packet sniffing and network protocol decoding with the integrated Wireshark protocol sniffer.
  10. Includes comprehensive management information detailing all aspects of the LANforge system including processor statistics, test cases, and Ethernet port statistics.
  11. GUI runs as Java application on Linux, Solaris and Microsoft Operating Systems (among others).
  12. GUI can run remotely, even over low-bandwidth links to accommodate the needs of the users.
  13. Central management application can manage multiple units, tests, and testers simultaneously.
  14. Includes easy built-in scripting to automatically iterate through bandwidth, latency and other settings. Advanced programatic scripting over a TCP socket also supported and example perl libraries and scripts are included.
  15. Automatic discovery of LANforge resources simplifies maintenance and configuration of LANforge test equipment.

Hardware Specification

  1. High-End i7 M-620 desktop server.
  2. Hardware supports a max of about 9Gbps transmit and receive (18Gbps across backplane.)
  3. Operating System: Fedora Linux with customized Linux kernel.
  4. Up to 6 PCIe Intel Pro/1000 10/100/1000 Ethernet ports. Additional 10/100/1000 Ethernet interface for management.
  5. High-availability Ethernet hardware bypass option available.
  6. 2-port 10G fiber or copper CX4 option available
  7. Second x1 PCIe slot can hold 802.11q/b/g/n WiFi NIC.
  8. Intel i7 M-620 2.66 GHz processor.
  9. One PCIe x8 (x16 physical) slot.
  10. 8 GB RAM.
  11. 40 GB or larger Hard Drive or Solid State Drive.
  12. External power brick supports Standard US or European power.
  13. Weight: 15 lbs or 6.8 kg.
  14. Dimensions: 7.68 x 4.33 x 10.55 inches   Metric: 195 x 110 x 268 mm.
  15. ROHS compliant.

List Price: $11,200     List Price with 1 Year support (17%): $13,104


Additional Feature Upgrades

Unless otherwise noted in the product description, these features usually cost extra:


Candela Technologies Inc., 2417 Main Street, Suite 201, P.O. Box 3285, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1 360 380 1618


Candela  Technologies, 2417 Main Street, Suite 201, Ferndale, WA 98248, USA
www.candelatech.com | sales@candelatech.com | +1.360.380.1618
Google+ | Facebook | LinkedIn | Blog

Last modified: Thu Jan 19 08:44:05 PST 2017