interface=vap1
driver=nl80211
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=ABCD-5678
bssid=c4:4b:d1:6a:f7:69
country_code=US
ieee80211d=0
ieee80211h=0
ieee80211w=0
hw_mode=a
ieee80211n=1
ieee80211ac=1
beacon_int=240
dtim_period=2
max_num_sta=2007
rts_threshold=2347
preamble=0
macaddr_acl=0
auth_algs=1
ignore_broadcast_ssid=0
# Enable HT modes if you want 300Mbps+ throughput.
#ht_capab=[HT20][HT40-][HT40+][GF][SHORT-GI-20][SHORT-GI-40]
#         [TX-STBC][RX-STBC123][MAX-AMSDU-7935][DSSS_CCK-40][PSMP][LSIG-TXOP-PROT]
ht_capab=[HT20][HT40+][SHORT-GI-40][SHORT-GI-20]
vht_capab=[MAX-MPDU-11454][RXLDPC][RX-STBC-1][MAX-A-MPDU-LEN-EXP0][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN][TX-STBC-2BY1][SHORT-GI-80]
wmm_enabled=1
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=0
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0
### TX queue parameters
tx_queue_data3_aifs=7
tx_queue_data3_cwmin=15
tx_queue_data3_cwmax=1023
tx_queue_data3_burst=0
tx_queue_data2_aifs=3
tx_queue_data2_cwmin=15
tx_queue_data2_cwmax=63
tx_queue_data2_burst=0
tx_queue_data1_aifs=1
tx_queue_data1_cwmin=7
tx_queue_data1_cwmax=15
tx_queue_data1_burst=3.0
tx_queue_data0_aifs=1
tx_queue_data0_cwmin=3
tx_queue_data0_cwmax=7
tx_queue_data0_burst=1.5
vht_oper_centr_freq_seg0_idx=42
vht_oper_chwidth=1
channel=36
supported_rates=60 90 120 180 240 360 480 540
ieee8021x=1
own_ip_addr=127.0.0.1
auth_server_addr=127.0.0.1
auth_server_port=1821
auth_server_shared_secret=lanforge
wpa=2
wpa_pairwise=CCMP
wpa_key_mgmt=WPA-EAP WPA-EAP-SHA256 

# 802.11u configuration
interworking=1
access_network_type=0
internet=0
asra=1
esr=0
uesa=0
venue_group=0
venue_type=0
venue_name=eng:LANforge Test Venue
ipaddr_type_availability=00
domain_name=lf0350-2cc4.lanforge.local
nai_realm=0,lf0350-2cc4.lanforge.local,12[4:6],21[2:4][5:7]

# HotSpot 2.0 configuration
hs20=1
hs20_oper_friendly_name=eng:LANforge HotSpot 2.0

#no_pri_sec_switch=1

hs20_icon=64:64:eng:image/png:logo-64x64.png:/home/lanforge/hs20/www/logo-64x64.png
osu_ssid="ABCD-1234"
osu_server_uri=https://osu-server.lf0350-2cc4.lanforge.local/hs20/spp.php/signup?realm=lf0350-2cc4.lanforge.local
osu_friendly_name=eng:LANforge HS20 Operator
osu_nai=osen@lanforge.com
osu_method_list=1 0
osu_icon=logo-64x64.png
osu_service_desc=eng:LANforge Example services